[ABD] Nyquist Show Groups Info (multiple ranks)

Any abandoned MODs will be moved to this forum.

WARNING: MODs in this forum are not currently being supported or maintained by the original MOD author. Proceed at your own risk.
Forum rules
IMPORTANT: MOD Development Forum rules

WARNING: MODs in this forum are not currently being supported nor updated by the original MOD author. Proceed at your own risk.
User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Wed Feb 20, 2008 3:32 pm

:?:
as i said, ALL the files that you find in the .zip package (in the first post of this topic).

RdJ1
Registered User
Posts: 119
Joined: Thu Oct 25, 2007 8:18 am
Location: The Netherlands

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by RdJ1 » Wed Feb 20, 2008 3:37 pm

There's a fault in the first post:
Nyquist wrote:German
It must be Dutch.

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Wed Feb 20, 2008 3:43 pm

edited, thanks

RdJ1
Registered User
Posts: 119
Joined: Thu Oct 25, 2007 8:18 am
Location: The Netherlands

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by RdJ1 » Thu Feb 21, 2008 2:23 pm

Dutch translations are both not for newest release. Here's the one for 0.4.0:

Code: Select all

<?php
/**
*
* acp_nyqshowgroupsinfo [Dutch]
*
* @translated by RdJ1 / vertaald door RdJ1
* @http://www.phpbb.com/community/memberlist.php?mode=viewprofile&u=355570
* @copyright (c) 2008 RdJ1 (this translation / deze vertaling)
*
* @package language
* @license http://opensource.org/licenses/gpl-license.php GNU Public License
*
*/

/**
* DO NOT CHANGE
*/
if (empty($lang) || !is_array($lang))
{
	$lang = array();
}

// DEVELOPERS PLEASE NOTE
//
// All language files should use UTF-8 as their encoding and the files must not contain a BOM.
//
// Placeholders can now contain order information, e.g. instead of
// 'Page %s of %s' you can (and should) write 'Page %1$s of %2$s', this allows
// translators to re-order the output of data while ensuring it remains correct
//
// You do not need this where single placeholders are used, e.g. 'Message %d' is fine
// equally where a string contains only two placeholders which are used to wrap text
// in a url you again do not need to specify an order e.g., 'Click %sHERE%s' is fine

$lang = array_merge($lang, array(
        'ACP_NYQ_SHOWGROUPSINFO_TITLE'			=> 'Nyquist Show Groups Info',
        'NYQ_SHOWGROUPSINFO_EXPLAIN'			=> 'In deze module kan je het aantal weer te geven groepsrangen onder de gebruikersrang op de topicpagina&rsquo;s en profielpagina&rsquo;s instellen. Als je dit op 0 zet, zal er geen groepsrang worden weergegeven. Je kan ook instellen of de gebruiker zijn/haar standaardgroeps rang krijgt als standaardrang. Als je wilt dat gebruikers hun rang op basis van het aantal berichten houden als ze van standaardgroep veranderen, kies dan "niet houden" in het formulier hieronder.',
        'NYQ_SHOWGROUPSINFO_NUMBERTITLE'		=> 'Confugiratie van de MOD',
        'NYQ_SHOWGROUPSINFO_NUMBERUSE'			=> 'Schrijf een nummer in het vak. Dit zijn het aantal groepsrangen die worden weergegeven.',
        'NYQ_SHOWGROUPSINFO_BEHAVIOUREXPLAIN'	=> 'Kies of je wilt dat de gebruiker zijn standaardgroeps rang houdt.',
        'NYQ_SHOWGROUPSINFO_BEHAVIOURINHERIT_Y'	=> 'houden',
        'NYQ_SHOWGROUPSINFO_BEHAVIOURINHERIT_N'	=> 'niet houden',
));

?>
(@ Rotsblok ;) )
If you want Dutch title instead of English:

find

Code: Select all

        'ACP_NYQ_SHOWGROUPSINFO_TITLE'			=> 'Nyquist Show Groups Info',
replace with:

Code: Select all

        'ACP_NYQ_SHOWGROUPSINFO_TITLE'			=> 'Nyquist Groepsinformatie',

User avatar
Kudlaty
Registered User
Posts: 62
Joined: Sat Feb 10, 2007 8:24 pm
Contact:

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Kudlaty » Fri Feb 22, 2008 3:21 am

so I go to install this on my forum...
Thanks for that mod. :)

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Sun Feb 24, 2008 11:30 am

0.4.1 is out.

If you have yet installed the 0.4.0 you do not need to change anything. There are only "code cleanings" in this release for a (not so far I hope) future submission to MODDB :D

Cougar Draven
Registered User
Posts: 4
Joined: Mon Feb 25, 2008 7:24 am

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Cougar Draven » Mon Mar 03, 2008 1:04 am

I'm having some issues with this MOD. So far, I've done everything required to install the thing. (I had to reupload three times, because for some reason, my modifications to some files didn't take, and then the upload didn't take...it was all fairly confusing.)

Now, maybe I'm missing something basic, but at present, there's nothing happening. Just the normal post-centered rank.

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Mon Mar 03, 2008 11:07 am

Cougar remember to:
  • do the proper changes to your templates (instructions can be found in the templates directory)
  • enable the system module (as per the DIY instructions in the install.xml)
  • go to the ACP where you installed the system module (usually in ACP -> General -> Board Configuration -> Nyquist Show Groups Info) and choose the maximum number of groups' ranks you want to show (the default value is 0, that is, no rank shown)
for other help I need more details.

derangedtaco
Registered User
Posts: 67
Joined: Sun Jul 01, 2007 3:09 am

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by derangedtaco » Sun Mar 09, 2008 3:49 pm

when i try to make a new group, i get this error........... Fatal error: Call to undefined function: group_create() in /home/deranged/public_html/forum/includes/acp/acp_groups.php on line 399

please help!

and when i try to promote someone to a group leader, i get this: Fatal error: Call to undefined function: group_user_attributes() in /home/deranged/public_html/forum/includes/acp/acp_groups.php on line 90

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Sun Mar 09, 2008 7:38 pm

it seems you have not properly modified the file includes/functions_user.php
For this file you need to replace 2 pieces of code but you probably have replaced the code in the wrong way.

Here's how you have to do it:
find:

Code: Select all

function group_create(&$group_id, $type, $name, $desc, $group_attributes, $allow_desc_bbcode = false, $allow_desc_urls = false, $allow_desc_smilies = false)
don't touch anything and find again (starting from this point in the file) the following

Code: Select all

remove_default_rank($group_id, $user_ary);
replace this final part with what is in the install.xml file

The second piece of code you have to change is:

find

Code: Select all

function group_user_attributes($action, $group_id, $user_id_ary = false, $username_ary = false, $group_name = false, $group_attributes = false)
do not touch anything and search from this point the following:

Code: Select all

remove_default_rank($gid, $uids);
Replace this last code with what is reported in install.xml

The two consecutive "find" are used to be sure to pick the exact piece of code to change.

derangedtaco
Registered User
Posts: 67
Joined: Sun Jul 01, 2007 3:09 am

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by derangedtaco » Mon Mar 10, 2008 3:34 am

thanks!

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Mon Mar 10, 2008 11:58 am

you're welcome

sssmsm
Registered User
Posts: 4
Joined: Fri Nov 02, 2007 3:34 am

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by sssmsm » Mon Apr 07, 2008 5:36 am

Just wondering on what the status of this is for being officially released. I'm really looking forward to installing this on my board, but I'm iffy on installing anything that's below RC. Thanks! :D

User avatar
Nyquist
Registered User
Posts: 70
Joined: Sat Dec 16, 2006 2:09 pm
Location: Italy

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Nyquist » Sat Apr 12, 2008 11:28 am

i submitted to MODDB and i have been given a few changes to do. Unfortunately I am a little busy at the moment. I hope I'll be ready to resubmit in a few days.

Lucci
Registered User
Posts: 8
Joined: Fri Aug 24, 2007 4:51 pm

Re: [BETA] Nyquist Show Groups Info (multiple ranks)

Post by Lucci » Wed Apr 23, 2008 1:21 pm

I did everything needed.

Edited all files.
Uploaded the other Files.
Added & activated the Module in acp.

but it didnt change anything its still the same as before. it doesnt show more than the normal rank like before.

Does this Mod still work? Or can someone help fixing my problem?


thanks

Locked

Return to “[3.0.x] Abandoned MODs”