[Convert] Fail convert SMF2.0RC2 to phpBB3.9

Converting from other board software? Good decision! Need help? Have a question about a convertor? Wish to offer a convertor package? Post here.
Scam Warning
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

because it doesn't need a index.php file.

you are making this way harder than it is.

you unzip the convertor zip to your computer.

you then have a folder named smf20_convertor

inside that folder you have two folders name install and includes

you upload those two folders ( install and includes ) to your board root.

then, in your browser, you go to:

http://yourdomain.com/yourphpbb/install

( no index.php or anything else )

on the page that comes up you will see a tab that says "convert"

click on it and there you will find your places to input your required information etc.

luck,
robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

Thxx robert i not used to phpbb that wasnt what i was doin. I ll try tonite.
thxxx
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

ok i get it, i ve removed the phpbb install directory, that s why i see the convertor dir.
should i reupload the whole phpbb install dir ?
thxx ofr your help
best regards
User avatar
Prosk8er
Registered User
Posts: 1744
Joined: Sun Mar 12, 2006 3:30 am
Location: Rochester, NY
Name: Tyler
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Prosk8er »

nocomp wrote:ok i get it, i ve removed the phpbb install directory, that s why i see the convertor dir.
should i reupload the whole phpbb install dir ?
thxx ofr your help
best regards
yes reupload the phpbb install directory
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

no, you follow my instructions above. nowhere does it say anything about uploading the phpbb install folder.

If you follow my instructions above, exactly , then you will be fine.


robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

i think i must have done something wrong...
i ve upload all you asked,as required
then:

so this is the first page
once in converter
once in converter
conv2.jpg (12.98 KiB) Viewed 7329 times
and once i clic on it
convertor page
convertor page
conv.jpg (12.5 KiB) Viewed 7329 times
what did i missed? :/

gosh i feel so noobs :/

thxx for your help
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

ok, what is the link to your board?

also, you are still trying to access the convertor file.

also, what are you using to upload the files?

you should be doing this using ftp. it looks like you are using your hosting control panel file manager instead.

you are not supposed to be trying to access the convertor file.

you do exactly as I said above.

upload those two folders to your board folder.

the includes folder will add it's files to the existing includes folder and the install folder will add itself to the list.

then, you do NOT try to access the convertor files at all.

you go to

yourdomain.com/yourphpbb/install

don't type anything after the install
dont' try to go anywhere else.

just do exactly what I showed.


robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
User avatar
Prosk8er
Registered User
Posts: 1744
Joined: Sun Mar 12, 2006 3:30 am
Location: Rochester, NY
Name: Tyler
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Prosk8er »

Lumpy Burgertushie wrote:ok, what is the link to your board?

also, you are still trying to access the convertor file.

also, what are you using to upload the files?

you should be doing this using ftp. it looks like you are using your hosting control panel file manager instead.

you are not supposed to be trying to access the convertor file.

you do exactly as I said above.

upload those two folders to your board folder.

the includes folder will add it's files to the existing includes folder and the install folder will add itself to the list.

then, you do NOT try to access the convertor files at all.

you go to

yourdomain.com/yourphpbb/install

don't type anything after the install
dont' try to go anywhere else.

just do exactly what I showed.


robert
doesn't he need the factory phpbb install directory which he deleted to be able you convert?
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

no, he needs the install folder that comes with the convertor files.

the original phpbb install folder would not have the proper links to the proper files etc.

besides, if it was there, then when you upload the one that comes with the convertor files it would just be overwritten or appended to actually.

that is why the convertor comes with its own install folder.


robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

Lumpy Burgertushie wrote:ok, what is the link to your board?

also, you are still trying to access the convertor file.

also, what are you using to upload the files?

you should be doing this using ftp. it looks like you are using your hosting control panel file manager instead.

you are not supposed to be trying to access the convertor file.

you do exactly as I said above.

upload those two folders to your board folder.

the includes folder will add it's files to the existing includes folder and the install folder will add itself to the list.

then, you do NOT try to access the convertor files at all.

you go to

yourdomain.com/yourphpbb/install

don't type anything after the install
dont' try to go anywhere else.

just do exactly what I showed.


robert
hi robert,
i did ecatly what you said, i use ftp client for upload files, and as unix sys admin, i think i quite know how handle a ftp client, don t see what is wrong :/ i pm you the link
thxx for your help
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

I have no PM yet.


robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

Weird,

I just resend using mail function
User avatar
Lumpy Burgertushie
Registered User
Posts: 69223
Joined: Mon May 02, 2005 3:11 am
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Lumpy Burgertushie »

ok, this is embarrassing. I was wrong about needing the phpbb install folder on the server.

as was mentioned above by bprsk8r4272, you do need to upload the install folder from the full phpbb download.

what happens is that once it is there and you upload the install folder that is included with the convertor, it appends the convertors folder to the existing install folder.


I am really sorry about the confusion.

so,

If you do not have a copy of the full phpbb then download it and unzip it to your computer.

then, upload the folder named install to your board root.

then check to make sure that the folder named install still has the folder named convertors inside it.

then, go to yourdomain.com/yourphpbb/install and you should be ok.

sorry,
robert
Premium phpBB 3.3 Styles by PlanetStyles.net

I am pleased to announce that I have completed the first item on my bucket list. I have the bucket.
User avatar
Prosk8er
Registered User
Posts: 1744
Joined: Sun Mar 12, 2006 3:30 am
Location: Rochester, NY
Name: Tyler
Contact:

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by Prosk8er »

ah i thought he needed that along with the converter files i couldn't remember what i did when i converted from phpnuke
nocomp
Registered User
Posts: 10
Joined: Sun Jun 09, 2013 3:19 pm

Re: [Convert] Fail convert SMF2.0RC2 to phpBB3.9

Post by nocomp »

ahhhhhhhhhhhhhhhhhhhhhhhhh thxx a lot!!
works much better this way :)
i ve been able to backup and convert in a breeze :)
thxx a lot!
so everythime you want to install a mod, you need to go through /intall dir ?
Locked

Return to “[3.0.x] Convertors”