Page 1 of 2

Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 6:28 am
by Exabot
The upgrade is in progress 3.0 -> 3.2 and gives an error. What could be wrong? Maybe try 3.0 -> 3.3?
https://www.phpbb.com/support/docs/en/3 ... /upgrade3/
SQL error.JPG

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 6:30 am
by Crizzo
Hi,


looks like your MySQL server had a timeout or blackout and so the conversion was aborted. :)

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 6:54 am
by warmweer
Exabot wrote:
Fri Aug 14, 2020 6:28 am
The upgrade is in progress 3.0 -> 3.2 and gives an error. What could be wrong? Maybe try 3.0 -> 3.3?
https://www.phpbb.com/support/docs/en/3 ... /upgrade3/
SQL error.JPG
Seeing you started from 3.0.9 or even earlier, and are already getting a timeout I'ld strongly advise to
a) update to 3.0.14 and use the Support Toolkit to make sure the starting point (either your initial 3.0.x or 3.0.14) is perfectly clean
b) upgrade on personal webserver, perhaps even in steps (3.0.14 > 3.1.12 > 3.2.10)
c) seeing the early timeout, probably CLI will be the only way
d) in any case: truncate the search tables (and repopulate those after succesful upgrade to the version you intend (I do suggest 3.3).

What's the size of your database?

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 7:01 am
by Exabot
Looks like the error is still somewhere in the files... I get the same error all the time. I'll try to upgrade from 3.0 to 3.1 later.

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 7:04 am
by Exabot
warmweer wrote:
Fri Aug 14, 2020 6:54 am
Exabot wrote:
Fri Aug 14, 2020 6:28 am
The upgrade is in progress 3.0 -> 3.2 and gives an error. What could be wrong? Maybe try 3.0 -> 3.3?
https://www.phpbb.com/support/docs/en/3 ... /upgrade3/
SQL error.JPG
Seeing you started from 3.0.9 or even earlier, and are already getting a timeout I'ld strongly advise to
a) update to 3.0.14 and use the Support Toolkit to make sure the starting point (either your initial 3.0.x or 3.0.14) is perfectly clean
b) upgrade on personal webserver, perhaps even in steps (3.0.14 > 3.1.12 > 3.2.10)
c) seeing the early timeout, probably CLI will be the only way
d) in any case: truncate the search tables (and repopulate those after succesful upgrade to the version you intend (I do suggest 3.3).

What's the size of your database?
I thought about doing the same. Thanks!
Database is 2.22GB

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 7:06 am
by Crizzo
Uh, that is to big for the web gui update.

I would recommend to use the CLI for the update. It can take like 2-4h with that size.

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Fri Aug 14, 2020 7:17 am
by warmweer
Exabot wrote:
Fri Aug 14, 2020 7:04 am
Database is 2.22GB
Yeah, I suspected it was an egg from an ostrich and not a robin. ;)
As Crizzo stated: forget about the standard update method and even web update.

It is going to take long whichever way so using the Support Toolkit first is almost imperative. You do not want to have it run for a couple of hours only to find out it failed because of some remaining modification or missing database item.

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 7:26 am
by Exabot
I managed to install a new backup, but now the STK can't work...
stk.png
template.php
Screenshot 2020-08-15 at 10.25.36.png

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 7:36 am
by Mick
If you’re talking about the board in your signature then the STK won’t work, it’s for 3.0 only unfortunately.

I see some issues with your cookies that may, or may not, be part of the issue.

The cookie domain is showing phpbbeesti.ee and it should be .phpbbeesti.ee, note the leading dot. Cookie secure needs enabling as you’re using https.

See Knowledge Base - Fixing incorrect cookie settings

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 7:41 am
by Exabot
This is not this forum.

Thank you for your attention. I'll change right now.

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 7:49 am
by Exabot
The only MOD is Tapatalk, which would need to be deleted.
Screenshot 2020-08-15 at 10.48.17.png

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 8:15 am
by ssl
Mick wrote:
Sat Aug 15, 2020 7:36 am
If you’re talking about the board in your signature then the STK won’t work, it’s for 3.0 only unfortunately.
Hi
I use STK on a forum in version 3.3.1, download here : https://github.com/AlexSheer/phpBB3.2-STK

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 1:55 pm
by Lumpy Burgertushie
notice that says it is for version 3.2 not 3.3
it may not work at all or some parts of it may not work.

the STK has to be for the same version as the board or it will not work properly if at all.

robert

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sat Aug 15, 2020 1:59 pm
by ssl
I know, but I use it on a version 3.3.1 forum without any problem. Then it is possible that all the functions are not all compatible.
Deactivating / Activating extensions is not a problem, adding users either.

Re: Upgrade 3.0 -> 3.2 -> 3.3

Posted: Sun Aug 16, 2020 9:28 am
by Exabot
Updating phpBB using the CLI and errors only...
In one virtual server:
Screenshot 2020-08-16 at 10.15.57.png
And another virtual server:
Screenshot 2020-08-16 at 12.22.16.png
Premissions:
Screenshot 2020-08-16 at 12.26.11.png
Can anyone suggest anything?