ACP Announcement Centre

All new MODs released in our MOD Database will be announced in here. All support for released MODs needs to take place in the Customisations Database.
Forum rules
READ: phpBB.com Board-Wide Rules and Regulations

NOTICE: This forum is only for the announcement of new releases and/or updates of MODs. Any MOD support should be obtained through the Customisations Database in the support area designated for each MOD.

A direct link to support for each MOD is in the first post of the respective topic.
User avatar
Galandas
Registered User
Posts: 731
Joined: Thu Jul 23, 2009 4:11 pm
Location: Italy
Name: Rey
Contact:

Re: ACP Announcement Centre

Post by Galandas » Wed Jan 20, 2010 6:49 pm

Italian translation 8-) ciao...

[The extension rar has been deactivated and can no longer be displayed.]

English is not my native language My CDB Contributions My RC extensions

User avatar
lefty74
Registered User
Posts: 3649
Joined: Wed Sep 14, 2005 8:26 pm
Location: NL
Contact:

Re: ACP Announcement Centre

Post by lefty74 » Wed Jan 20, 2010 8:34 pm

Galandas wrote:Italian translation 8-) ciao...

it.rar
thanks very much, i updated the third post :)
lefty74
zoocrew.eu - help us save our wildlife
My MODS | Due to lack of time I unfortunately am unable to work on my mods anymore, anyone who has ideas to improve them and would like to take any of them over, please PM me.

stealth1
Registered User
Posts: 74
Joined: Wed Jul 20, 2005 4:54 am

Re: ACP Announcement Centre

Post by stealth1 » Thu Jan 21, 2010 5:10 am

I was wondering how I can change the titles in the admin section, they are a bit ugly.

From ACP_Announcement_Center to Announcement Center
Fromt ACP_Announcement_Center_Config to Announcement Center Config

User avatar
ChriZathens
Registered User
Posts: 1477
Joined: Tue Apr 18, 2006 9:11 pm
Location: Athens, Greece
Name: Chris

Re: ACP Announcement Centre

Post by ChriZathens » Thu Jan 21, 2010 8:51 am

Those should not be like this...
This indicates a language file problem. Make sure that you made all language edits
My mods in MODDB:
Add Homepage link in header - Change user activity post limit - Post number in viewtopic
If you need support click on the support tab there and post your question.
Do not PM me - chances of viewing my PMs are way thinner than viewing the support question in the customization DB...

iftitaj
Registered User
Posts: 638
Joined: Tue Jan 15, 2008 6:21 am
Location: Karachi, Pakistan

Re: ACP Announcement Centre

Post by iftitaj » Thu Jan 21, 2010 3:18 pm

stealth1 wrote:I was wondering how I can change the titles in the admin section, they are a bit ugly.

From ACP_Announcement_Center to Announcement Center
Fromt ACP_Announcement_Center_Config to Announcement Center Config
ChriZathens wrote:Those should not be like this...
This indicates a language file problem. Make sure that you made all language edits
If I'm not wrong, this is the problem of saving your edited file with BOM. Try using Notepad++ and select "without BOM". That should solve your problem hopefully.

User avatar
lefty74
Registered User
Posts: 3649
Joined: Wed Sep 14, 2005 8:26 pm
Location: NL
Contact:

Re: ACP Announcement Centre

Post by lefty74 » Thu Jan 21, 2010 7:33 pm

what language are you using? i tend to agree with ChriZathens
lefty74
zoocrew.eu - help us save our wildlife
My MODS | Due to lack of time I unfortunately am unable to work on my mods anymore, anyone who has ideas to improve them and would like to take any of them over, please PM me.

SignaL84
Registered User
Posts: 110
Joined: Mon Jan 11, 2010 7:45 pm
Location: Egypt
Name: Mohamed Roushdy

Re: ACP Announcement Centre

Post by SignaL84 » Mon Jan 25, 2010 12:09 pm

i've removed all board files and restored them again

re-edited all files carefully

installed the mod very successfully

but i FAILED again :S

only guests can see the annoucements, there must be something wrong in my ACP, the radio-check options in "configuration" cannot be saved, if i choose any of them "everyone, guests, groups" and "submit" the changes after refreshing that page it appears as if i didn't select any option, deselected, neither of the "group(s) that should see the ann" options is marked as shown below

Image

User avatar
daveht
Registered User
Posts: 195
Joined: Mon Jan 05, 2009 9:57 pm
Location: NH USA
Contact:

Re: ACP Announcement Centre

Post by daveht » Mon Jan 25, 2010 1:47 pm

SignaL84 wrote:i've removed all board files and restored them again

re-edited all files carefully

installed the mod very successfully

but i FAILED again :S

only guests can see the annoucements, there must be something wrong in my ACP, the radio-check options in "configuration" cannot be saved, if i choose any of them "everyone, guests, groups" and "submit" the changes after refreshing that page it appears as if i didn't select any option, deselected, neither of the "group(s) that should see the ann" options is marked as shown below

Image
You must highlight all the groups in the box and then click groups. To highlight them click on the first and hold the button and scroll down the screen until all are highlighted in blue.

Hope this helps!
Dave

iftitaj
Registered User
Posts: 638
Joined: Tue Jan 15, 2008 6:21 am
Location: Karachi, Pakistan

Re: ACP Announcement Centre

Post by iftitaj » Mon Jan 25, 2010 4:36 pm

daveht wrote:
SignaL84 wrote:i've removed all board files and restored them again

re-edited all files carefully

installed the mod very successfully

but i FAILED again :S

only guests can see the annoucements, there must be something wrong in my ACP, the radio-check options in "configuration" cannot be saved, if i choose any of them "everyone, guests, groups" and "submit" the changes after refreshing that page it appears as if i didn't select any option, deselected, neither of the "group(s) that should see the ann" options is marked as shown below

Image
You must highlight all the groups in the box and then click groups. To highlight them click on the first and hold the button and scroll down the screen until all are highlighted in blue.

Hope this helps!
Dave
Or you may use Ctrl (in Windows) to select random groups. :P

In your highlighted area, select "Groups" from radio buttons, as told by Dave.

User avatar
lefty74
Registered User
Posts: 3649
Joined: Wed Sep 14, 2005 8:26 pm
Location: NL
Contact:

Re: ACP Announcement Centre

Post by lefty74 » Mon Jan 25, 2010 6:55 pm

SignaL84 wrote:i've removed all board files and restored them again

re-edited all files carefully

installed the mod very successfully

but i FAILED again :S

only guests can see the annoucements, there must be something wrong in my ACP, the radio-check options in "configuration" cannot be saved, if i choose any of them "everyone, guests, groups" and "submit" the changes after refreshing that page it appears as if i didn't select any option, deselected, neither of the "group(s) that should see the ann" options is marked as shown below

Image
could you please change your config.php to have debug enabled (should look like this at the end:

Code: Select all

@define('PHPBB_INSTALLED', true);
 @define('DEBUG', true);
// @define('DEBUG_EXTRA', true);
and let me know what error messages you are getting, if any?
lefty74
zoocrew.eu - help us save our wildlife
My MODS | Due to lack of time I unfortunately am unable to work on my mods anymore, anyone who has ideas to improve them and would like to take any of them over, please PM me.

SignaL84
Registered User
Posts: 110
Joined: Mon Jan 11, 2010 7:45 pm
Location: Egypt
Name: Mohamed Roushdy

Re: ACP Announcement Centre

Post by SignaL84 » Mon Jan 25, 2010 9:02 pm

Thx Lefty, debugging is already enabled, no errors at all, is there any option in the ACP may affect the work of your MOD?!....

i've no other mods installed

my board is weired :D

thx

User avatar
lefty74
Registered User
Posts: 3649
Joined: Wed Sep 14, 2005 8:26 pm
Location: NL
Contact:

Re: ACP Announcement Centre

Post by lefty74 » Mon Jan 25, 2010 9:19 pm

SignaL84 wrote:Thx Lefty, debugging is already enabled, no errors at all, is there any option in the ACP may affect the work of your MOD?!....

i've no other mods installed

my board is weired :D

thx
weird indeed :P

can you see the database entries in the config table? do any of the options save when you change them in the acp?
lefty74
zoocrew.eu - help us save our wildlife
My MODS | Due to lack of time I unfortunately am unable to work on my mods anymore, anyone who has ideas to improve them and would like to take any of them over, please PM me.

SignaL84
Registered User
Posts: 110
Joined: Mon Jan 11, 2010 7:45 pm
Location: Egypt
Name: Mohamed Roushdy

Re: ACP Announcement Centre

Post by SignaL84 » Mon Jan 25, 2010 9:29 pm

everything is saved normally except your MOD :D

i will try again some other time

thanks and best regards

User avatar
lefty74
Registered User
Posts: 3649
Joined: Wed Sep 14, 2005 8:26 pm
Location: NL
Contact:

Re: ACP Announcement Centre

Post by lefty74 » Mon Jan 25, 2010 9:42 pm

are you saying nothing saves in the configuration for the mod? are you on mysql?
lefty74
zoocrew.eu - help us save our wildlife
My MODS | Due to lack of time I unfortunately am unable to work on my mods anymore, anyone who has ideas to improve them and would like to take any of them over, please PM me.

SignaL84
Registered User
Posts: 110
Joined: Mon Jan 11, 2010 7:45 pm
Location: Egypt
Name: Mohamed Roushdy

Re: ACP Announcement Centre

Post by SignaL84 » Mon Jan 25, 2010 10:01 pm

yes im, is that bad?!

im going to install another board for testing purposes

Locked

Return to “[3.0.x] MOD Database Releases”